Products

Hi Fix cationic bitumen emulsion RSI

Hi-Fix® Emulsion SS 1 is specially designed oil based bitumen emulsion with low viscosity,extended setting time and stability with cement that makes it an ideal product for Prime Coat application. It is black in colour and is a free flowing liquid at ambient temperature. Hi-Fix® Emulsion SS I is manufactured strictly as per IS 8887:2004.

APPLICATIONS:

Hi-Fix® Emulsion SS 1 is ideally suited for Prime Coating on WMM/WBM surfaces and it has the ability to penetrate 8-10 mm deep into low porous WMM surface.

Precautions to be taken to ensure best result while using emulsion:

Cationic Emulsion is very user friendly material. It helps in numerous ways viz. faster execution of work, economy, safety for workforce and environment protection. However, there are some precautions to be taken while using these materials, which are listed below:

DO'S

• Use at ambient temperature

• Roll the bitumen emulsion drums 5 times before using.

• Use Emulsion at temperatures above 50C

• Aggregate may be washed before use for superior results

• Store unused quantities of Emulsion in air tight/ closed container for subsequent use

• Emulsion can be used on wet aggregates during rainy season

• PH Controlled water may be added to the Emulsion for dilution@1:1 , if required, for better control on

• Spraying and penetration. Entire quantity of thus diluted Emulsion must be used immediately for Prime Coat operation only.

DON'T'S

• Do not store packed/bulk Emulsion in open container/tank

• Do not mix different type of Emulsion togather

• Do not heat Emulsion even found thick in consistency

• Never use Emulsion when it is raining Continuously

• Do not store any quantity of diluted Emulsion

• Do not fill loose earth in potholes before spraying Emulsion

• Do not spray Emulsion on a dusty surface

APPLICATIONS:

Recommended rate of application

Availability

Hi-Fix@Emulsion SS 1 is available in

• Bulk

• RC Drums 200 Kg

• MS Drums 200 Kg

• HDPE Drums 200 Kg