GENERAL INFORMATION Hi-Fix Cationic Bitumen Emulsion RS1

Hi Fix® emulsion RS 1 is a product manufactured out of bitumen dispersed into the water in form of fine globules(micro size) by means of an emulsifying agent. The later acts to decrease interfacial stress between the bitumen and water thus preventing their breakage during normal condition of storage. This type of emulsion carry positive charges and is very much suitable for negatively charged aggregates exclusively and abundantly available in our country. These positively charged emulsion after getting in touch with the negatively charged aggregates deposes bitumen particles on the aggregates while water gets evaporated. This emulsion with low viscosity and fast setting time is an ideal product for spray application. Hi Hi Fix® RS 1 is manufactured strictly as per IS: 8887:2004 and ASTMD : 2397 and quantity consciousness is maintained at all levels of manufacture.

Properties :

  1. It comes in liquid form
  2. It is chocolate brown in colour.
  3. It does not have any smell.

Advantages :

  • It is applied cold thus saving energy in place of firewood or fuel oils.
  • No health hazards because of absolute pollution free, thus environmental friendly.
  • Easy and uniform spray.
  • High adhesive properties.
  • Except heavy downpour, construction in wet weather possible.
  • Low temperature curing, fast setting time.

Applications & Uses :

Hi Fix® RS 1 is ideally suited for tack coat application, single coat surface dressing.

It is used for surface dressing (single/two coat)

Tack coat with Hi Fix® Emulsion can be applied on bituminous surface, aged bituminous surface, primed bituminous surfaces and non bituminous surfaces.

Requirements Specifications
1. Bitumen surface 2 to 2.5 / 10 Sq.m.
2. Aged bitumen surface 2.5 to 3 / 10 Sq.m.
3. Primed surface 2.5 to 3 / 10 Sq.m.
  Granular base (not primed) 3.5 to 4.0 / 10Sq.m
  Cement concrete pavement 3.0 to 3.5 / 10Sq.m.

Precautions to be taken to Ensure Best Results :

DO’S

  • Roll emulsion drum to and fro 5-6 times before use
  • Use emulsion at temperatures above 5 degree C.
  • PH controlled water may be added to the emulsion @1:1. If required, for better control on spraying and penetration. entire quantity of thus diluted emulsion must be used immediately for prime coat operation only.

DON’TS

  • Emulsion should be stored in open container/tank
  • Do not mix different type of emulsion together.
  • Do not fill loose earth in potholes before spraying emulsion
  • Do not spray emulsion on a dusty surface.

Packing

Hi-Fix ® Emulsion RS1 is available in

  • Bulk
  • RC Drums 200Kg
  • MS Drums 200Kg
  • HDPE Drums 200Kg

Storage

It must be stored in properly sealed drums under a cover, no matter whether it is a tarpaulin cover for storage place is recommended from 5 to 85 degree C.

Cost Comparison

In so many cases studied, total cost of construction with Cationic Bitumen Emulsions works out favorably, when compared with hot mix method. A brief comprehensive cost comparison of Hi Fix ® Emulsion RS 1 with hot mix may be provided on demand.

WORKING WITH US

Extensive Company Network

We are open to any cooperation with other companies! We can establish long-term and mutually beneficial relations and become reliable partners.

Request a quote

Testimonials

Read More

INTERESTING IN WORKING WITH
jalnidhi?

Join our dynamic team of innovative personnel for an immense exposure in this field where you will get to exchange in-depth knowledge and improve your skills through training and experience.