- +91 98302 20701 / +91 9830040702
- headoffice@jalnidhi.com
- Request A Quote
Hi-Fix' Emulsion MS is specially designed water based bitumen emulsion with moderate viscosity and setting time. The medium range of setting time makes it on ideal product for premixing applications. It is chocolate brown in colour and is a free flowing liquid at ambient temperature. Emulsion MS is manufactured strictly as per IS 8887:2004.
| Typical Properties | HI-Elf Emulsion MS |
|---|---|
| Residue on 600 Micron IS Sieve, % Max | 0.05 |
| Viscosity @ 50 degree C (Saybolt Viscometer), sec. | 50-300 |
| Setting Time. minutes | 30 |
No heating required
Cost efficient
Easy and uniform-mixing
Low temperature curing
Minimum preparation time for surface repair
Medium setting time
High adhesive properties
Stable patch
Resistant to stripping by water
Environment Friendly
Bonds well with cool, damp surfaces
Hi-Fix` Emulsion MS is ideally suited for :
Pothole Repair/Patch work/ Profile
Correction 20 mrn Pre-mix carpet
Precautions to be taken to ensure best result while using emulsion:
Cationic Emulsion is very user friendly material. It helps in numerous ways viz. faster execution of work, economy, safety for workforce and environment protection. However, there are some precautions to be token while using these materials, which ore listed below:
Use at ambient temperature
Roll the bitumen emulsion drums 5 times before using.
Use Emulsion at temperatures above 5 degree C
Aggregate may be washed before use for superior results
Store unused quantities of Emulsion in air tight/ closed container for subsequent use
Emulsion can beNsed on wet aggregates during rainy season
PH Controlled wales' may be added to the Emulsion for dilution41:1. if required, for better control on spraying and penetration. Entire quantity of thus diluted Emulsion must be used immediately for Prime Coot operation only.
Do not store packed/bulk Emulsion in open container/tank
Do not mix different type of Emulsion together.
Do not heat Emulsion even found thick in consistency
Never use Emulsion when it is raining continuously
Do not store any quantity of diluted Emulsion.
Do not fill loose earth in potholes before spraying Emulsion
Do not spray Emulsion on a dusty surface
Recommended Rate of Application
Typical rate of application of Hi-Fix Emulsion MS for preparation of mix is 7-8% by weight of aggregates.
Availability
Bulk
RC Drums 200 Kg
MS Drums 200 Kg
HDPE Drums 200 Kg
We welcome collaborations with businesses, fostering long-term, mutually beneficial partnerships built on trust and reliability.
Join our dynamic team to gain in-depth knowledge, enhance your skills, and grow through hands-on training and experience.
New technologies and development of new methods of constructions constitute an important contribution to the solution of road maintenance problem.
