HIND Plastic Felts are excellent for usage as Water Proofing Membrane on Roof Tops, Underground Repairs, Coverings and on all areas where protection from water, damp & leakage is required.
Characteristics | HIND | HIND Plus |
---|---|---|
1. Roll Length: | 20 m | 10 m |
2. Roll Width: | 1 m | 1 m |
3. Weight: | 2504 - 45 kg 2104 - 35 kg 1904 - 30 kg |
H 30 - 30 kg H 40 - 40 kg |
4. Thickness: | --- | H 30 - 2.0 mm H 40 - 3.0 mm |
5. Reinforcement: | Two layers of Bitumen (modified & Plasticized) linings contained in the three layers of HDHM virgin Polyethylene flim. | |
6. Finishing: | HIND is available in black finish with polyethylene film surfacing. | |
7. Quality Control: | HIND is subjected to stringent quality control measures at own in-house laboratory. |
Hind is fast and easy in application & makes a smooth surface. For proper application, the surface is required to be completely clean to eliminate all sharp projections.
After cleaning, suitable Prime/ Brown Bitumen is coated on to the surface. HIND is unrolled over the coated surface and bonded completely to substrate.
Characteristic | Requirement | HIND BMP Felt |
---|---|---|
Softening Point | ≥120 degree C | ≥120 degree C |
Penetration at 25 degree C 100g 5 sec | ≥25 | ≥25 |
Membrane Tensile Strength Lengthwise Crosswise |
140 N / 5 cm 120 N / 5 cm |
120 N / 5 cm 120 N / 5 cm |
Elongation (both direction) | >300% | >150% |
Heat Resistance at 100 degree C for 1 hr. | No Dripping | No Dripping |
Cold Resistance (pliability) at-5 degree C for 25 hrs. | No Cracking | No Cracking |
We welcome collaborations with businesses, fostering long-term, mutually beneficial partnerships built on trust and reliability.
Join our dynamic team to gain in-depth knowledge, enhance your skills, and grow through hands-on training and experience.